Geimori GU63 Review: Is This the Breville Smart Grinder Pro Killer?

|by Ryde Jeavons
Black Geimori coffee grinder on a kitchen bence

Short answer: for most people starting out in espresso, yes. The Geimori GU63 gives you a 63mm conical burr, almost zero retention and an all-metal build for around what you'd pay for the grinder most beginners default to. It's slower than an appliance grinder and it's single dose only, so it won't suit everyone. Here's what I found after putting it through its paces.

Why everyone buys the Smart Grinder Pro

For years, if you had around $200 to spend on a grinder, you bought the Breville Smart Grinder Pro. For the money it grinds pretty well, and if you're getting into espresso it's almost a must have. I've recommended it plenty of times.

But I've never loved the look of it. It feels cheap on the bench, and I see a lot of them come through our café with the same problem (more on that below). So when a 63mm conical burr grinder turned up on my doorstep at a similar price, I wanted to know if the default choice is still the right one.

What is the Geimori GU63?

Geimori is a brand from Wirsh, a US company that manufactures in China and is best known for its Kickstarter grinders. The GU63 is its entry level single dose grinder. Wirsh sent me this one to review, but my thoughts are my own, and I'll tell you what I don't like as well as what I do. Heads up, the GU63 links here are affiliate links, so I earn a small commission if you buy through them.

Build and design

This is where the GU63 surprised me most. It looks like a prosumer grinder, not the aluminium and plastic appliance you'd find in a big box store. Sit it on your bench and you'll look like you know what you're doing, even if you're still learning.

  • All metal. The only plastic part is the small doser feed that slows the grounds as they fall.
  • Heavy and compact. It weighs about 3kg and stands around 30cm tall, but the footprint is smaller than my palm.
  • No screen. There's no LED or LCD display. At this price, I don't miss it.
  • Matte black only, for now. I'd love to see a white version. If you've got a black machine like a Profitec Go or a Turin Legato, it's a great match.

The 63mm conical burr, and what it means in your cup

A 63mm conical burr is roughly double the size of what you get in most entry level appliance grinders. It's the same burr size as the Niche Zero. I'm not saying it's in the same class as the Niche, but it's creeping towards it.

So why conical rather than flat? It comes down to what you like drinking:

  • Flat burrs suit light roasts and Nordic style filter. They bring out clarity, acidity and fruit, with a thinner body.
  • Conical burrs suit medium roast espresso. They give you heavier body, a syrupy mouthfeel and deeper, sweeter flavours.

A bigger conical burr also means more contact with the beans, so it grinds more coffee with every turn.

Slow RPM: kinder to your coffee, harder on your patience

The GU63 runs at about 110 RPM, two to three times slower than a typical appliance grinder. Because the burr is so big, it still gets through the beans, but without building up heat. Less heat means you keep more of the oils and sugars that should end up in your cup.

The trade-off is time. I measured about 15 seconds for 10g, so you're looking at around half a minute for a normal espresso dose. You'll need a bit of patience.

Grind quality and retention

The grounds come out fluffy, consistent and with very few clumps. With most appliance grinders you end up doing extra puck prep like WDT to fix clumping. With the GU63 I barely needed to.

Retention is the standout. Many appliance grinders hold back two to four grams of old coffee inside the chamber, which then ends up in your next shot. Wirsh claims 0.1g retention for the GU63, and in my testing it was often even less. You might see close to a gram sitting inside after grinding, but a few pumps of the bellows on top push it all out.

There's also an anti-static ionizer inside, which helps the grounds fall cleanly into the dosing cup. If you hit the bellows hard, a few fines can puff into the air, but overall it's a very tidy grinder. It's far cleaner than the original Fellow Opus I reviewed, which made a real mess on the bench.

Easy cleaning and a steel impeller

To clean it, you simply unwind the top and the burrs are right there. Brush it out, pop the parts back, wind it back up, and it returns to the same spot every time. That tells me the burr alignment is good. You'd never keep an appliance grinder this clean.

The impeller is steel, and this matters more than it sounds. I get so many customers bringing grinders into our café saying, "It's spinning, but no coffee comes out." I know straight away it's the impeller. Most appliance grinders use a plastic one, and after a year or two it wears down until it can't push the coffee through. A steel impeller avoids that.

One more thing I love: the magnetic dosing cup. The magnet is seriously strong, so it snaps into place every time.

Dialling in: stepless, from Turkish to cold brew

The GU63 is stepless, with a dial that runs up to about 85. Plenty of appliance grinders give you around 30 steps, with maybe 10 of them usable for espresso. This gives you near endless adjustment.

On our commercial machine, my espresso setting sat just under 25. That left loads of room to go finer for Turkish coffee and coarser for filter, plunger and cold brew. Whatever machine you have, you'll be able to dial it in properly.

How the coffee tasted

For the test I used a washed Costa Rican, a Caturra and Typica with notes of malt, maple and sweet spice. It's lovely black and cuts through milk beautifully.

I dosed 22.5g and pulled a 25 second shot. It was super smooth and well balanced, with good sweetness. It was a touch lemony, which tells me it was slightly under extracted, so next time I'd grind a little finer to push it out to around 28 seconds. Still a lovely coffee, and a very good shot for a grinder at this price.

That kind of rich, sweet, balanced espresso is exactly what we roast for. If you'd like coffee built for a grinder like this, our Blind Date subscription is a good place to start. Every coffee in it scores 84+ on the specialty scale.

GU63 vs Smart Grinder Pro vs Niche Zero

Against the Smart Grinder Pro: at its launch price, the GU63 is much better value. You get a bigger burr, a far better build, almost no retention and more adjustment. The only reason I'd still pick the Breville is if you don't want to single dose and would rather grind straight from a hopper.

Against the Niche Zero: same burr size for a fraction of the cost. The GU63 isn't in the same class, and you won't get quite the same extraction you can chase on a Niche. But for the price difference, it's a very good compromise.

Price and where to buy: the GU63 launched with an early bird price of $199, with the regular price set at $299. You can buy the Geimori GU63 here, and code RYDE gets you 15% off. At full price there are a few other grinders worth comparing, but with the discount it's hard to beat.

Who should buy the Geimori GU63?

The GU63 is a great fit if:

  • You've got a decent espresso machine, like a Profitec, a Rancilio or even a Linea Mini, but your grinder budget is limited.
  • You love medium roast espresso and milk coffees with body and sweetness.
  • You want to upgrade from an appliance grinder before spending thousands.

It's probably not for you if:

  • You mostly drink light roast or Nordic style filter and want maximum clarity. A flat burr grinder will suit you better.
  • You want a hopper you can fill and forget. This is a single dose grinder.
  • You need your dose ground in a hurry.

If you're still putting your setup together, have a read of my ultimate beginner’s guide to espresso machines.

FAQ

Is the Geimori GU63 better than the Breville Smart Grinder Pro? For most home espresso drinkers, yes. It has a larger 63mm conical burr, an all-metal build, far lower retention and stepless adjustment. The Smart Grinder Pro is still the better pick if you want to grind from a hopper instead of single dosing.

Is the Geimori GU63 good for espresso? Yes. It's built for espresso first, especially medium roasts where you want body and sweetness. The stepless dial gives you plenty of fine adjustment to dial in any machine.

How much coffee does the GU63 retain? Wirsh claims 0.1g, and in my testing it was often less. A few pumps of the bellows clear out anything left in the chamber.

How long does the GU63 take to grind a dose? About 15 seconds per 10g, so roughly half a minute for a typical espresso dose. The slow 110 RPM motor keeps heat down, but it does take patience.

Is the GU63 good for filter coffee? It can grind for filter, plunger and cold brew. But if you mainly drink light roast filter and want maximum clarity, a flat burr grinder is a better match.

Is the Geimori GU63 the same as a Niche Zero? No. Both use a 63mm conical burr, but the Niche Zero is a higher class of grinder. The GU63 gets you a good way there for a fraction of the price.

As always, enjoy your brew.

Ryde

0 comments

Leave a comment

Please note, comments need to be approved before they are published.